Mazda CX-30 Method MR502 Center Cap Adapter
$35.00
This adaptor will allow you to use the Mazda OEM center caps from your Mazda CX-30 wheels and adapt them to work for the 17″ Method MR502 Rally wheels.
Each order will come with (4) center cap adaptors and (20) M5 x 10mm Button Head Hex Screws and you just need to provide the center caps from your factory wheels. May also work for other center caps that are 2-5/16″ diameter from Subaru. Verify that your center caps look like the ones in the photo and that your Methods are also the same.
We can also make the adaptor blank or with “Method” embossed in the center for more affordable replacement center caps compared to Method’s replacements that sell for $132 for a set of four.
Adapters are printed from ABS plastic so its recommended to primer and paint them before installing for UV protection.
Please contact if you have any questions about fitment before ordering.
Description
Because most of our products are 3D-printed, there may be small variations from one to another. 3D-printed parts may show small artifacts/blemishes as well as layer lines but this does not take away from the functional use of the part. Slight color variations may also occur.
Additional information
| Weight | 5 oz |
|---|---|
| Dimensions | 100 × 200 × 25 in |
Vim –
An outstanding product! All holes align perfectly with the MR502 wheel without any play. The OEM CX-30 center caps snap in with a little effort, giving you absolute confidence that they’re secure. These also help clear the rear axle shaft protruding past the wheel.
These adapters are an absolute must to giving the Methods that finishing touch. Looks very OE+ and I couldn’t be happier!