Vanagon Fridge Vent Plate Instructions
Step 1: Remove the old vent plate by unscrewing the two Philips head screws. Step 2: With our new Fridge Vent Plate in hand, prep the wiring as show in the diagram and picture below: …
Luciano
Vanagon Gaugepod Instructions
Thank you for ordering the ALT-Manufacturing Gauge Pod for the Volkswagen Vanagon. We hope you enjoy the product and continue to support small 3D printing business in the future. Step 1: Remove the stock Vanagon …
Yamaha LED Headlights
Step 1: Remove the three phillips screws from the front fairing. There is one at the top in the center and the other two are located on each side toward the bottom. Now remove the …
2015-2021 WRX Accessport Install
Step 1: Carefully pry up defroster vent on the left side of the dash and remove. Step 2: Feed Accessport cable from the OBD-II connector and have it come out of the opening where the …
22 WRX Accessport Installation
Installation Steps: Step 1: Remove the dash defroster vent on the left side. Use a plastic pry tool to carefully pry up from the front. Step 2: Remove the OEM blue clip from the vent …